S76373

If you've ever dealt with water in your diesel fuel, you know the headaches it can cause - rough running, hard starting, and potentially thousands in injection system repairs. Water contamination in diesel fuel is one of the biggest threats to your tractor's injection system, and this fuel water separator filter is your first line of defense against the moisture that can destroy expensive injectors and fuel pumps. Whether you're dealing with condensation from temperature changes, contaminated fuel deliveries, or water accumulation in storage tanks, this spin-on filter removes both water and debris before they can reach your engine's precision fuel system components. Key Features This fuel water separator uses advanced filtration technology that not only removes solid contaminants but also separates water from the fuel stream before it can reach your injection pump and injectors. 150-micron filtration efficiently captures particles while maintaining proper fuel flow Transparent or drain-equipped design lets you monitor water accumulation without disassembly This high-quality separator prevents water from reaching fuel pumps, injection pumps, and injectors, which can cause catastrophic failures costing thousands in repairs. The efficient filtration removes particles that can score precision injection components and cause performance degradation. Heavy-duty construction stands up to farm conditions and regular maintenance cycles Built for Real Farm Work Essential fuel system component for tractors operating in diverse agricultural environments where fuel quality can vary significantly. These tractors commonly work in dusty harvest conditions, remote field locations using stored fuel, and operations where equipment may sit idle between seasons, all situations where fuel contamination risks are elevated. Your tractor depends on clean, dry diesel fuel for reliable operation whether you're running long days during planting season, operating demanding equipment during harvest, or powering through heavy field work. This fuel water separator is especially critical when you're using farm-stored diesel that may have accumulated moisture from temperature cycling. Made to Last From compact utility tractors maintaining small farms to larger models powering grain operations, clean fuel filtration is critical for protecting modern common-rail and traditional injection pump systems from microscopic particles that cause premature wear. Regular water separation maintains optimal combustion efficiency, reduces emissions, and extends engine life while preventing fuel system corrosion that leads to expensive component replacement. Clean, dry fuel ensures reliable starting in cold conditions and maintains consistent power output essential for demanding agricultural operations. Installation Notes Installs in your fuel line between the tank and injection pump using standard filter mounting procedures. Check for water accumulation in the filter bowl regularly, especially during periods of high humidity or temperature cycling that can cause condensation in fuel tanks. Prime the fuel system properly after filter changes to avoid air pockets that can cause hard starting or rough running. Mount in an accessible location for easy maintenance, and always use proper thread sealant rated for diesel fuel.

Your tractor's injection system is working harder than ever with today's tight tolerances and high pressures, especially if you've noticed rough running or power loss that could signal fuel contamination. This secondary fuel filter steps in as your last line of defense, catching microscopic particles and water that the primary filter might miss. When you're counting on reliable power for harvest, planting, or daily chores, clean fuel isn't just important—it's everything. What You're Getting 5-micron filtration captures fine particles that can damage modern injection systems Normal flow design maintains proper fuel delivery for consistent engine performance 6-inch height provides ample filtration media for extended service life Round construction handles fuel system pressures without distortion Compatible with standard diesel fuel and biodiesel blends commonly used on farms Built for Real Farm Work This filter works across a wide range of agricultural tractors from utility models handling daily farm chores to larger machines powering through harvest and heavy fieldwork. Whether you're running hay equipment, working ground, or pulling implements, these tractors depend on clean fuel to deliver reliable power when you need it most. Made to Last Farm fuel faces tough challenges—moisture from temperature changes, contamination from storage and handling systems, and the dust and debris that's part of agricultural life. This filter handles those real-world conditions with construction that maintains its seal and filtration efficiency season after season. Installation Notes This is a secondary filter, meaning it works downstream from your primary filter for extra protection. Make sure your tractor doesn't have an electric fuel lift pump system before installing, as this filter is designed for mechanical fuel systems. Change it along with your primary filter during regular maintenance intervals.

When you're dealing with questionable fuel quality or working in dusty conditions, water and contaminants in your diesel can wreak havoc on expensive injection components. This fuel filter water separator catches the problem before it reaches your fuel system, protecting those high-pressure pumps and injectors that cost thousands to replace. It's your first line of defense against the gunk that can turn a productive day into a costly breakdown. What You're Getting 150-micron filtration removes particles and water contamination before it damages injection components Compact 3.6-inch design fits in tight engine compartments without taking up valuable space Pre-filter setup means it protects your main fuel filter from heavy contamination loads Normal flow design handles standard fuel delivery requirements without restricting performance Round end construction ensures proper seal and easy installation Built for Real Farm Work This water separator is engineered for the mid-size to larger Massey Ferguson tractors that handle serious agricultural operations. These tractors pull wide implements, operate loaders, and run long hours during critical seasons like planting and harvest. Whether you're running a 6200 series utility tractor for hay operations or an 8200 series row-crop machine through marathon harvest days, clean fuel delivery keeps you productive when time matters most. Made to Last Farm fuel faces unique challenges from moisture condensation in storage tanks to contamination from handling systems. This separator uses quality filter media that captures both particles and water before they can damage your fuel system. The robust construction handles engine vibration and temperature swings while maintaining effective filtration performance season after season. Installation Notes This pre-filter typically installs between your fuel tank and main fuel filter, giving you two stages of protection. The 150-micron rating means it catches the big stuff while letting your main filter handle the fine particles. Check your fuel lines for any debris during installation, and prime the system properly to avoid air pockets that can cause hard starting.