+2
+2
+5
This Fuel Filter perfect match Tractor, effectively removes dirt, water, and contaminants. Order now!
There's nothing quite like the sinking feeling when your tractor starts running rough during busy season, especially when it turns out to be dirty fuel causing expensive injection system problems. Modern diesel engines are pickier than ever about clean fuel, and this reverse flow filter gives you the protection you need to keep those high-pressure systems running smoothly. What You're Getting Reverse flow design that actually extends filter life by creating a self-cleaning action Ultra-fine 5-micron filtration catches even microscopic particles and water that regular filters miss 6-inch round end construction maximizes the filter media surface area for better flow Built tough to handle the pressure and temperature swings of modern fuel systems Works across multiple tractor brands, so you can stock one filter for different machines Built for Real Farm Work This filter fits a wide range of equipment including Ford TS and TM series, Valtra and Valmet tractors, plus several other brands with advanced fuel injection systems. These are the tractors doing the heavy lifting on today's farms - precision planting, heavy tillage, harvesting support, and all the demanding work where fuel quality directly impacts your bottom line. Made to Last The reverse flow technology is what sets this filter apart. Instead of fuel flowing the usual way, it forces fuel from the outside in, which prevents premature clogging and keeps the filter working efficiently longer. This means fewer filter changes and better protection for those expensive common rail and high-pressure fuel components that cost thousands to repair. Good to Know Pay attention to the flow direction markings when you install this - the reverse flow design only works when it's oriented correctly. Replace it according to your manufacturer's intervals or if you notice any performance issues. Keep a spare on hand during critical seasons, because clean fuel is cheap insurance compared to injection system repairs.
- length 173 + 23 mm- outer diameter 80 mm, mounting collar 69 mm- inner diameter 23 mm- filter capacity: 99 % of particles over 10 micronsMore information about compatibility:- for models with PA -pump in the filter housing
If you've ever dealt with a tractor that's running rough or won't start when you need it most, you know how important clean fuel is. This primary fuel filter is built specifically for Ford TM series tractors with single-filter fuel systems - and that single-filter design is key because it's got different top lugs than the dual-filter setups. Getting the wrong one means poor fuel flow and potential problems down the road. What Makes This Filter Special Designed only for single-filter tractors - those unique top lugs won't work on dual-filter systems Removes water, dirt, and debris before they reach your expensive injection components Built to handle today's diesel fuel challenges including biodiesel blends and contamination Extended service life means fewer filter changes and less downtime during busy seasons Built for Demanding Work Your TM120 through TM190 tractors are serious workhorses handling everything from heavy tillage and large-scale planting to harvest support and commercial farming operations. These 120-190 horsepower machines run long hours in tough conditions, and they need fuel filtration that can keep up with the demands of field work, whether you're pulling a deep ripper through hardpan or running a big planter during spring rush. Quality That Holds Up This filter uses high-efficiency media that captures particles and water while maintaining proper fuel flow rates. The construction is designed to handle the pressure cycles and vibration that come with heavy farm work, and it'll keep doing its job season after season without restricting fuel delivery to your engine. Installation Notes This is a direct replacement for single-filter systems only - don't try to use it on dual-filter setups as the top lug design is completely different. When you're changing the filter, it's a good time to check your fuel lines for any signs of wear or cracking, and always prime the system properly to avoid air pockets that can cause starting problems.
When you're dealing with Ford TS/TM or Valtra Valmet tractors, you know these machines have sophisticated fuel systems that don't mess around. These modern tractors pack high-pressure common rail systems and electronic injection that can turn expensive real quick if dirty fuel gets through. This 5-micron filter catches the tiny stuff that'll wreck your fuel pumps and injectors—the kind of contamination you can't even see but costs thousands to fix. What You're Getting Ultra-fine 5-micron filtration that removes water, dirt, and microscopic particles before they cause trouble Extended 6-inch length gives you more filter media and longer service intervals High-quality construction that maintains steady fuel flow even when working hard Built to handle the high pressures and temperature swings these modern systems dish out Advanced sealing that prevents fuel bypass—every drop gets filtered properly Built for Modern Farm Work Ford TS/TM series and Valtra Valmet tractors are serious machines designed for intensive farming operations. Whether you're running precision planting, heavy tillage, or harvest support work, these tractors deliver the power and efficiency today's farming demands. Their advanced fuel systems with turbochargers and electronic management need ultra-clean fuel to keep running at peak performance and maintain those tight emissions standards. Made to Last This filter is engineered specifically for the demanding conditions these tractors face. The robust construction handles the vibration, temperature changes, and high fuel system pressures that come with modern agricultural work. Quality filter media maintains consistent flow rates so your engine gets the clean fuel it needs, season after season. Installation Notes This is a direct replacement for your OEM filter—no modifications needed. Replace it according to your service schedule or if you notice hard starting, rough running, or any fuel system warning lights. Always use clean diesel and keep an eye on fuel quality, especially if you're dealing with stored fuel or questionable sources. A little attention to your fuel system now saves major headaches later.
Kits listing this number
Sold as a complete set — a repair kit for 87802927, or a set that includes it. The price shown is for the set.
Filter Kit for CASE IH Tractor MXM120 Replace Part Number:FUEL FILTER, WATER SEPARATOR CARTRIDGE:P551434, 87802923AIR FILTER, SAFETY RADIALSEAL:P777639, 82034623AIR FILTER, PRIMARY ROUND:P606946, 82014793FUEL FILTER, WATER SEPARATOR CARTRIDGE:P551425, 87803442AIR FILTER, PANEL VENTILATION:P784574AIR FILTER, PRIMARY RADIALSEAL:P781039, 82034629LUBE FILTER, SPIN-ON FULL FLOW:P551297, 1931172FUEL FILTER, WATER SEPARATOR CARTRIDGE:P551433, 87802927HYDRAULIC FILTER, SPIN-ON:P502224, 1931173 Specification:1x FUEL FILTER, WATER SEPARATOR CARTRIDGE:P551434, 878029231x AIR FILTER, SAFETY RADIALSEAL:P777639, 820346231x AIR FILTER, PRIMARY ROUND:P606946, 820147931x FUEL FILTER, WATER SEPARATOR CARTRIDGE:P551425, 878034421x AIR FILTER, PANEL VENTILATION:P7845741x AIR FILTER, PRIMARY RADIALSEAL:P781039, 820346291x LUBE FILTER, SPIN-ON FULL FLOW:P551297, 19311721x FUEL FILTER, WATER SEPARATOR CARTRIDGE:P551433, 878029271x HYDRAULIC FILTER, SPIN-ON:P502224, 1931173 Applications: Fit for CASE IH Tractor: MXM120
Your source for Filter Kit For CASE. Visit us for affordable prices, a compatible guarantee, and fast shipping.



