- length 154 mm- outer diameter 80 mm- inner diameter 23 mm- filter capacity 99 % of particles over 15 microns- primary filterMore information about compatibility:- for TM models with fuel pump in the filter housing- models A75, A85, and A95 from engine number N19165 onwards- models 6200 and 6300 from engine number N19956 onwards- model 6400 from engine number N10362 onwards- models 6250Hi and 6350Hi from engine number N19960 onwards- model 6550Hi from engine number N11771 onwards, pre-filter- model 8050 from engine number N12153 onwards- model 8150 from engine number N13239 onwards- models 8050Hi, 8150Hi from engine number N12129 onwards- models A75, A85, and A95 also in -2 and -4 versions - model N111 also in E version- models N121 and N141 also in Adv version- T series models also as Versu/Direct models- XM series models also as Common Rail models- C120 also as EcoPower model- Combine harvester model Sampo 2065 with Common Rail injection system
When you're pushing long hours during harvest or planting season, fuel contamination is the last thing you need causing problems. This extended 5-inch water separator fuel filter gives you that extra capacity and filtration time you need when there's no time to stop for filter changes. The longer design means more dirt-holding capacity and better water separation than the standard 4.3-inch version—perfect for high-hour tractors working in demanding conditions. What You're Getting Extended 5-inch length holds more dirt and water between changes 30 micron filtration catches the fine particles that wreck injectors Reverse flow design with crinkled ends maximizes water separation Advanced water separation technology keeps moisture out of your fuel system Built tough to handle the high-pressure demands of modern fuel systems Built for Real Farm Work This filter is designed for the workhorses in your fleet—Ford New Holland TM series tractors and John Deere 6030 series machines that put in serious hours. Whether you're running a TM190 pulling a 40-foot cultivator or a 6030 series powering through harvest with a grain cart, these tractors need clean fuel to keep their injection systems running smoothly through long days and demanding conditions. Made to Last The extended housing gives you more surface area for filtration, which means longer service intervals during busy seasons when every hour counts. The robust construction handles temperature swings, vibration, and the high fuel pressures these modern engines demand. Quality materials ensure consistent performance whether you're dealing with farm tank fuel or questionable diesel from remote locations. Good to Know Make sure you've got clearance for the longer 5-inch housing before you order—measure twice, install once. This serves as the primary water separator on Ford New Holland TM120-190 models and works as a secondary filter on John Deere 4-cylinder 6030 series tractors. Always install with the flow arrow pointing in the right direction and drain any water buildup regularly to keep things running clean.
