646102M1

Rigid Stabiliser Bar 802mm for Massey Ferguson TE-tractors. See which under Suitable for models.Technical specification:Holes-Ø: 22mmLength: 802mm Height:44mmThickness: 9.5mm

If you've noticed your implements swinging side to side when you're backing up or working on uneven ground, chances are your stabilizer brackets have seen better days. When these brackets get worn or damaged, your three-point implements can develop a mind of their own, making precise work nearly impossible and putting unnecessary stress on both tractor and implement. What You're Getting Heavy-duty steel construction that handles the constant stress of field work Right-hand configuration designed specifically for proper stabilizer arm positioning Direct replacement design that bolts right in where the original went Corrosion-resistant finish that holds up to weather and field conditions Precision mounting holes that line up perfectly with your tractor's original specs Built for Real Farm Work This bracket fits Ford New Holland N-Series and 600-1000 Series tractors, plus Massey Ferguson TE-35 and 100 Series models . These are the workhorses you'll find doing everything from cultivating and disking to running finish mowers and box blades. Whether you're hooking up a bush hog or precision planting, this bracket keeps your implements tracking straight. Made to Last Farm work is tough on equipment, and stabilizer brackets take a beating from the constant push and pull of implements. This bracket's built from heavy-duty steel with the kind of robust construction that stands up to years of hard use. The corrosion-resistant finish means it'll keep doing its job even when exposed to fertilizer, moisture, and all the other harsh conditions your tractor faces. Installation Notes This is a direct bolt-in replacement - no modifications needed. While you've got things apart, it's smart to inspect your stabilizer pins and bushings too. Replace both left and right brackets at the same time for best performance and safety . Make sure all your mounting hardware is properly torqued before heading back to the field.

When your three-point hitch implements sway back and forth like a pendulum, or your bush hog drifts sideways while you're trying to cut straight rows, this rigid stabilizer bar is exactly what you need. Those older tractors like your Massey Ferguson 35 or Ford 8N were built tough but sometimes need a little help keeping implements tracking straight. This flat steel bar connects your lower links to eliminate dangerous side-to-side movement. What You're Getting Two-hole flat design that's simple and effective—no complicated adjustments needed Rigid construction prevents implement sway during operation and transport Heavy-duty steel that won't bend under load like lighter alternatives might Direct replacement design fits original mounting points without modifications Sold as a pack of two, priced per unit for your convenience Built for Classic Farm Work This stabilizer bar fits the workhorses that built American agriculture—Massey Ferguson's 35 series utilities, the reliable TE series, and Ford's legendary 8N and 9N tractors. These machines handle everything from bush hogging to cultivating, and they need stabilizers that can keep up with real farm work without breaking down when you need them most. Made to Last Farm equipment gets bounced around, stressed, and exposed to weather year after year. This stabilizer bar is built from heavy steel that handles the constant loading and unloading cycles of three-point work. The flat design distributes stress evenly, so it won't develop weak spots or bend out of shape after a few seasons of hard use. Installation Notes Installation is straightforward—this rigid bar connects directly between your lower link mounting points using the existing holes. The two-hole design means no guesswork about adjustment settings. Just bolt it in place and you're ready to work. Keep a wrench handy to check the bolts after your first few hours of operation.