04115560

When you've got Perkins power running your operation, you know you're dealing with serious engines that'll run for decades—but only if they get the clean oil they need. This 170mm long oil filter is what keeps countless tractors from your neighbor's Massey Ferguson to that big Case down the road running strong through thousands of hours of hard work. What You're Getting Extra-long 170mm design packs more filtration capacity than shorter filters Genuine Perkins specifications for perfect fit and performance Universal compatibility across multiple tractor brands and engine series Spin-on design makes filter changes quick and mess-free High-capacity media handles extended service intervals and tough conditions Built for Real Farm Work This filter fits Perkins engines across the board—from 2000 series all the way up to 7000 series diesels. You'll find these powerplants in everything from compact utility tractors running loaders to big row-crop machines pulling planters. Whether it's a Landini pulling disc, a Case MX running the mixer wagon, or even Claas combines and Kubota tractors with Perkins power, chances are good this is your filter. Made to Last That extra length isn't just for show—it means more filter media and better dirt-holding capacity when you're pushing through dusty harvest conditions or extending service intervals. The robust construction handles the pressure swings and temperature extremes that come with hard farm work, while maintaining proper oil flow even when it's cold. Installation Notes Always pre-fill the new filter with clean oil before installing to prevent dry starts. Wipe some oil on the gasket, spin it hand-tight until contact, then just 3/4 turn more—over-tightening damages gaskets and makes your next change harder. Here's a pro tip: cut open your old filter to check what's inside. Normal fine particles are expected, but metal chunks mean trouble brewing.

- thread 3/4" - 16- length 174 mm- outer diameter Ø 93 mm- efficiency 99% 48 micronsMore information on compatibility:- Volvo L50D from serial number 13713- suitable for Claas combine harvester model Dominator 88 S with Perkins 6.354.4 engine- suitable for Claas combine harvester model Dominator 88 SL with Perkins 1006.6 and 1006.6T engine- suitable for Claas combine harvester model Dominator 98 S with Perkins T60.60 engine- JCB excavator 814S with Perkins 1006.6 engine from model year 10/88 - JCB excavator 816S with Perkins 1006.6 engine from model year 10/88

When you're changing oil on your Fiat tractor, you know how tight those engine compartments can get. This short-style spin-on oil filter was designed with that in mind—it gives you the full protection of a standard filter but won't fight you for space around the engine. Whether you're maintaining a workhorse 880 or a bigger 110/90, this filter keeps things running smooth without the clearance headaches. What You're Getting Compact short design that fits tight spaces without sacrificing filtration quality Spin-on convenience—no messy cartridge changes or oil spills during service High-efficiency filtration media that catches harmful contaminants before they reach critical engine parts Steel canister construction that handles the vibration and temperature swings of farm work Direct replacement that threads right onto your engine's filter base Built for Real Farm Work This filter works on Fiat 110/90 and 880 series tractors—machines that see serious hours doing everything from heavy cultivation to loader work. These mid-range European tractors are known for their reliability, and keeping clean oil flowing through that engine is part of what makes them last. It also fits various Same, Volvo, and Ford New Holland models that share similar engine designs. Made to Last Farm equipment filters take a beating, and this one's built to handle it. The steel canister won't crack under pressure, and the filtration media holds up to temperature changes and contamination loads you'd expect from hard-working tractors. It meets OEM specifications, so you're getting the same protection that came from the factory. Installation Notes Installation is straightforward—just spin off the old filter and thread on the new one. Put a thin film of clean oil on the rubber gasket before installing, and hand-tighten plus three-quarters of a turn to get a proper seal. The short profile makes access easier in cramped engine bays, and you'll appreciate that during those quick oil changes between busy seasons.

When you're running your tractor hard all day, your engine oil is working just as hard—picking up dirt, metal particles, and other contaminants that want to turn your expensive engine into scrap metal. This full-flow oil filter is your first line of defense, keeping that oil clean so your Perkins engine keeps running strong season after season. What You're Getting Full-flow design that filters 100% of your engine oil on every pass 170mm length provides extra filtration capacity for longer service intervals Premium filter media traps particles down to microscopic levels Heavy-duty construction with robust canister and quality gaskets Mann quality engineering that meets or exceeds OEM specifications Built for Real Farm Work This filter is designed specifically for Perkins diesel engines in the 3000, 4200, 4300, 5400, 6200, and 7000 series. You'll find these engines powering everything from compact utility tractors to big row-crop machines across brands like Massey Ferguson, Case IH, New Holland, Landini, Same, and Lamborghini. These are the workhorses running loaders, planting, cultivating, and handling whatever job you throw at them. Made to Last Farm equipment doesn't get babied, and neither do the filters. This Mann filter is built with quality materials that stand up to temperature swings, vibration, and the demands of long operating hours. The extended 170mm length means more filter media and better dirt-holding capacity, so you can run longer between changes without compromising protection. Good to Know This is a direct spin-on replacement—just unscrew the old filter and thread on the new one. Always apply a thin coat of clean oil to the gasket before installing, and hand-tighten only after the gasket contacts the mounting surface. Don't forget to check your oil level after the first few hours of operation with the new filter.

When you're putting in long days in the field, the last thing you want is engine trouble from dirty oil. A quality oil filter keeps metal particles, dirt, and combustion byproducts from circulating through your engine, protecting everything from pistons to bearings. This replacement filter keeps your oil clean and your engine running strong for years to come. What You're Getting Full-flow filtration that catches debris before it can damage engine components Quality filter media that maintains proper oil pressure while trapping contaminants Durable construction built to handle the heat and pressure of hard-working diesel engines Direct OEM replacement - no modifications needed for installation Built for Real Farm Work This filter serves a wide range of mid-size utility and row-crop tractors from Ford New Holland, Case IH, Fiat, and other brands. These are the tractors you'll find pulling cultivators, running hay equipment, operating loaders, and handling everything from fieldwork to barnyard chores. Their engines work hard and deserve quality filtration. Made to Last Farm equipment filters take a beating from temperature swings, vibration, and extended service intervals. This filter uses quality materials and construction to handle tough conditions while maintaining proper oil flow and filtration efficiency throughout the service period. Good to Know Change your oil filter every time you change your oil - it's cheap insurance for your engine. Make sure to pre-fill the new filter with clean oil before installation to avoid dry starts. A thin coat of oil on the rubber gasket helps ensure a proper seal without overtightening.